Fencing · Vinyl systems

Count vinyl panels, posts, gates, and concrete.

Remove gate openings, round infill to whole manufacturer panels, account for separate runs, and price every major material line.

← Total fence run →↕ Fence heightGate opening removed← Gate width →

← Nominal panel width →↕ Panel heightPost · panel · post

1 Lay out runs, gates, and panels

Total fence runfeetSeparate straight runscountGatescountGate widthfeet eachNominal panel widthfeetPanel allowancepercentConcrete bags per postbags

2 Enter product prices

Price per panelUSDPrice per postUSDPrice per post capUSDPrice per gate kitUSDPrice per concrete bagUSD

Preliminary vinyl-fence order

13 panels

Net panel infill run96.0 ft

Layout panels before allowance12

Average fitted panel span8.00 ft

Posts and caps14 each

Gate kits1

Concrete bags28

Panels$1495.00

Posts and caps$518.00

Gates and concrete$490.00

Estimated material total$2503.00

Preliminary material count, not a post-by-post layout or structural design. The model removes equal gate widths, rounds net infill to nominal whole panels, adds one post for each gate and one start post per entered straight run, then applies allowance only to purchased panels. Real segment lengths may require more panels than this combined-run method. Verify exact manufacturer panel modules, routed posts, corner/end/gate post types, hardware, transitions, slopes, rackability, post depth and footings, wind exposure, property lines, utilities, permits, and local requirements.

Transparent calculation

Net infill run ÷ nominal panel width.

Panels round up before allowance. Post count adds panel transitions, gate transitions, and a start position for each entered straight run.